7/70
“LS Ubiquitous RF-ID System”
CAUTION
1. Do not let the product wet by rain or snow during transportation.
It may cause the deterioration of product function.
2. Do not keep the product in the place with high humidity or possible
hazard to submersion.
It may cause the destruction of insulation or deterioration of product function.
3. Do not install the product under the abnormal environment having a
hazard to submersion or dust etc.
It may cause the product damage or deterioration.
4. Connect the external signal cable or power cable correctly.
If not, it may cause the fire or product damage.
5.
After installation, remove foreign materials (work tools, electric cables,
Bolt).
It may cause the fire, failure or malfunction.
6. I/O signal/Communication cables shall be installed apart at least 100mm
from high voltage cable or power cable.
It may cause the fire or electric shock.
7. Pay attention to the invasion of rats, insects or animals.
It may cause the malfunction or fire.
8. Dispose the wastes in the designated place not to influence the environment.
It may cause the environment pollution.
Summary of Contents for LGRF-H
Page 23: ...23 70 LS Ubiquitous RF ID System 2 4 Product Appearance and Dimension Fig 2 4 1 LGRF H Reader...
Page 24: ...24 70 LS Ubiquitous RF ID System Fig 2 4 2 LGRF H Reader Fig 2 4 3 Antenna A Type...
Page 25: ...25 70 LS Ubiquitous RF ID System Fig 2 4 4 Antenna B Type Fig 2 4 5 Antenna C Type...
Page 70: ...70 70 LS Ubiquitous RF ID System 2 Example of MELSEC PLC ASCII mode communication...
