LS ELECTRIC H100 Series, Manual

Page: 29 / 84

H100 _
29
Energy Saving Drive
Input Terminal Group (IN)
Code Comm. No Name LCD Display Set Range Default Attribute
*
00
- Jump code Jump Code 1~99 65
O
01 0h1501 Frequency upon maximuminput by analog Freq at 100% Start frequency ~ Max. frequency (Hz) Max. frequency
O
05 1 0h1505 V1 Input level display V1 Monitor(V) 0~12.00(V) or -12.00~12.00(V) 0.00
X
06 0h1506 V1 input polarity selection V1 Polarity
0 Unipolar
0: Unipolar Δ
1 Bipolar
07 0h1507 V1 input filter time constant V1 Filter 0-10000(msec) 10 O
08 0h1508 V1 input minimum voltage V1 Volt x1 0.00~10.00(V) 0.00 O
09 0h1509 Output % at V1 minimum voltage V1 Perc y1 0.00~100.00(%) 0.00 O
10 0h150A V1 input maximum voltage V1 Volt x2 0.00~12.00(V) 10.00 O
11
0h150B Output % at V1 maximum voltage V1 Perc y2 0.00~100.00(%) 100.00
O
12 2
0h150C V1 input minimum voltage V1–Volt x1’ -10.00~0.00(V) 0.00
O
13 0h150D Output % at V1 minimum voltage V1–Perc y1’ -100.00~0.00(%) 0.00
O
14 0h150E V1 input maximum voltage V1–Volt x2’ -12.00~0.00(V) -10.00
O
15 0h150F Output % at V1 maximum voltage V1–Perc y2’ -100.00~0.00(%) -100.00
O
16
0h1510 Changing V1 rotation direction V1 Inverting
0 No
0: No
O
1 Yes
17 0h1511 V1 quantizing level V1 Quantizing 0.00 3 , 0.04~10.00(%) 0.04 O
20 4 0h1514 Temperature display T1 Monitor(V) 0.00~100.00(%) - X
35 5 0h1523 V2 input display V2 Monitor(V) 0.00~12.00(V) 0.00 O
37
0h1525 V2 input filter constant time V2 Filter 0-10000(msec) 10
O
38
0h1526 V2 input minimum voltage V2 Volt x1 0.00~10.00(V) 0.00
O
39 0h1527 Output % at V2 minimum voltage V2 Perc y1 0.00~100.00(%) 0.00
O
40 0h1528 V2 input maximum voltage V2 Volt x2 0.00~10.00(V) 10.00
O
41 0h1529 Output % at V2 maximum voltage V2 Perc y2 0.00~100.00(%) 100.00
O
46
0h152E Changing V2 rotation direction V2 Inverting
0 No
0: No
O
1 Yes
47 0h152F V2 quantizing level V2 Quantizing 0.00 6 , 0.04~10.00(%) 0.04 O
50 7 0h1532 I2 input display I2 Monitor(mA) 0~24(mA) 0 O
52 0h1534 I2 input filter constant time I2 Filter 0-10000(msec) 10 O
53
0h1535 I2 input minimum current I2 Curr x1 0.00~20.00(mA) 4.00
O
54
0h1536 Output % at I2 minimum current I2 Perc y1 0.00~100.00(%) 0.00
O
55 0h1537 I2 input maximum current I2 Curr x2 0.00~24.00(mA) 20.00
O
56 0h1538 Output % at I2 maximum current I2 Perc y2 0.00~100.00(%) 100.00
O
61
0h153D Changing I2 rotation direction I2 Inverting
0 No
0: No
O
1 Yes
62 0h153E I2 quantizing level I2 Quantizing 0.00 8 , 0.04~10.00(%) 0.04 O
65 0h1541 P1 terminal function setting P1 Define
0 None
1: Fx
Δ
1 Fx
66 0h1542 P2 terminal function setting P2 Define 2 Rx 2: Rx Δ
67
0h1543 P3 terminal function setting P3 Define 3 RST 5: BX
Δ
68 0h1544 P4 terminal function setting P4 Define 4 Disparo externo 3: RST
Δ
69 0h1545 P5 terminal function setting P5 Define 5 BX 7: Sp-L
Δ
70 0h1546 P6 terminal function setting P6 Define 6 JOG 8: Sp-M
Δ
71
0h1547 P7 terminal function setting P7 Define
7 Speed-L
9: Sp-H
Δ
8 Speed-M
9 Speed-H
11 XCEL-L
12 XCEL-M
13 XCEL-H
14 XCEL Stop
15 RUN Enable
16 3-Wire
17 2nd Source
18 Exchange
1
IN-05’ setting range can be changed according to the ‘IN-06’ settings.
2
IN-12~IN-17codes appear whenIN-06 code is set as 1(Bipolar).
3
When set as 0,Quantizing is not available.
4
IN-20 code appears when analog voltage/current input terminal setting switch (SW3) is set as T1.
5
IN-35~IN47 codes appear when analog voltage/current input terminal setting switch (SW4) is set as V2
6
When set as 0,Quantizing is not available.
7
IN-50~IN-62 codes appear when analog voltage/current input terminal setting switch (SW5) is set as I2
8
When set as 0, Quantizing is not available.