48
HDD
To set S.M.A.R.T. settings:
1
Right-click and then click
Menu.
2
Enter the system user name (default:
admin
) and password (default:
000000
) and click
Yes
.
3
Click
HDD>HDD Detect
.
4
Under
HDD
, select the hard drive you would like to check.
NOTE:
You can see the HDD No. of installed hard drives under the
HDD>General
sub-menu.
5
Under
Self-test Type
, select the type of S.M.A.R.T. test you would like to run.
6
Click
next to
S.M.A.R.T
. to begin the S.M.A.R.T. test. Wait for the test to complete.
Select S.M.A.R.T. test type
Click to start test
Select hard drive
Checking the Hard Drive for Errors
The NVR can check the hard drive for errors or bad sectors.
To check the hard drive for errors:
1
Right-click and then click
Menu
.
2
Enter the system user name (default:
admin
) and password (default:
000000
) and click
Yes
.
3
Click
HDD>HDD Detect>Bad Sector Detection
.
4
Under
HDD
, select the hard drive you would like to check.
NOTE:
You can see the HDD numbers of installed hard drives under the
HDD>General
sub-menu.
Summary of Contents for LNR340
Page 17: ...xv Web Browser Remote Playback 174 Troubleshooting 176...
Page 18: ...xvi...
