158
Appendix B: Installing or Replacing the Hard Drive
Removing the Hard Drive
Make sure that the power cable has been disconnected before changing the
hard drive.
To remove the hard drive:
1
Remove the screws from the back (x2) and side panels.
2
Remove the screws from each side panel (x3) and the top of the rear panel (x2) of the cover.
Side panel screws
Rear panel screws
Do not remove the other screws on the rear panel.
3
Disconnect the power and data cables from the hard drive.
4
Turn the NVR over and remove the 4 hard drive screws. Remove the hard drive from the
system.
Make sure to hold the hard drive in place while removing the screws to avoid
damaging the NVR.
Remove the screws to
remove the hard drive
5
Turn the NVR back over and replace the cover. Replace the side panel and rear panel screws.
Summary of Contents for LNR340
Page 17: ...xv Web Browser Remote Playback 174 Troubleshooting 176...
Page 18: ...xvi...
