Lorenz Starlight Pro, User Manual

Page: 63 / 108

65 User Manual
on the Slave Chart Plotter, the MOB is placed but the navigation to the MOB is not
activated.
Notes
While navigating to the external destination the Operating Mode is switched to Master
mode, the navigation to the external destination will be terminated. An appropriate
warning message will be shown to notify that the Navigation to the external destina-
tion is active and to confirm whether Slave mode can be set. Setting Slave mode, the
C-link navigation data will be deleted.
The C-link navigation data are deleted at Power Off.
4.8.1.5 C-Link navigation data: Acquisition and Display
As soon as the C-link navigation data is received, the Slave parses the infor-
mation received and executes the relative actions depending on its current working
status.
Important
When the Navigation to the external Destination is activated, the Slave Chart Plotter will show
all relevant c-link navigation data exactly like when the destination is not the external one:
(Destination Name, DST and BRG to Destination, calculate XTE, calculate TTG etc). These
values will be displayed all places where required and they will be used to format NMEA-0183
output data.
4.8.1.6 Graphical representation on Map Display
Fig. 4.8.1.6 - Graphical Displaying
4.8.1.7 Route Data Report
When the Navigation to the External Route is received, it will be possible to
display the information related to the External Route by entering the Route Data
Report.