Lorenz Starlight Pro, User Manual

Page: 48 / 108

50 User Manual
Selecting route
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"ROUTE REPORT" + 'ENTER' + "ROUTE #" + 'ENTER'
Use the cursor key to select the route number and press 'ENTER'. The route, shown
by straight segments, is centered on the screen, with the cursor on the central
Waypoint. See also Par. 4.1.2.1.
Note
If there is the Target in the current route, it is not possible to change the current route. So if the
"Route #" item is selected, the chart plotter emits three beeps.
Changing Speed & Fuel values
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"ROUTE REPORT" + 'ENTER'
It is possible to modify the Speed and Fuel consumption values, respectively by se-
lecting "SPEED" and "FUEL". Insert value by using the cursor key and pressing
'ENTER'.
Reversing route
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"ROUTE REPORT" + 'ENTER' + "REVERSE" + 'ENTER'
Reversing a route plan is most typically used to return to the point where the route
originally started. See also Par. 4.1.2.3.
Deleting route
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"ROUTE REPORT" + 'ENTER' + "CLEAR" + 'ENTER'
A window is opened: select "YES" and press 'ENTER' to confirm (select "NO" and
press 'ENTER' otherwise). The route remains on the screen shaded until the screen
is redrawn. To delete the route see also Par. 4.1.1.4 and 4.1.2.2.
4.1.2.6 Route Name
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' +
"ROUTE NAME" + 'ENTER'
Use the cursor key to insert the route name (max 16 alphanumeric char.).
4.1.2.7 Send/Receive Route
To transmit the Active Route information onto the NMEA output port.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ROUTE" + 'ENTER' + "SEND"
The NMEA WPL & RTE messages are sent to the output port.
To save Route information received from the NMEA input port.