Lorenz Starlight Pro User Manual Download Page 103

Page: 103 / 108

105

User Manual

Trouble shooting

THE CHARTPLOTTER DOES NOT TURN ON

Make sure that the correct voltage (10-35 volt dc) is present. Check also that

the polarity is correct. Refer to the Par. 2.2.

THE CHARTPLOTTER DOES NOT GET A VALID FIX

Make sure that no metal obstacle is placed around the chartplotter acting as

a shield for the antenna. If, after 15 minutes, the chartplotter does not get the fix,

turn it Off and On again.

THE CHARTPLOTTER DOES NOT TURN OFF

If, after a 'POWER' pressure (for at least 3 seconds) the chartplotter does not

turn Off, then turn Off the voltage.

THE CHARTPLOTTER DOES NOT RESPOND TO ANY COMMAND

Try to turn Off, and then turn On. If the problem persists, erase the memory

(see Par. 6.5.1).

Summary of Contents for Starlight Pro













































































































Search results

Summary of Contents for Starlight Pro

Reviews:

Related manuals for Starlight Pro

Brands by name

Popular brands

Lorenz Starlight Pro, User Manual

Search results

Summary of Contents for Starlight Pro

Reviews:

Related manuals for Starlight Pro

Brands by name

Popular brands