Lorenz Starlight Pro, User Manual

Page: 87 / 108

89 User Manual
Deleting Target (Advanced Mode) : place cursor on 'ENTER' + 'DELETE' + 'ENTER'
TD = Time Difference
Loran-C positions are determined by precise timing of the intervals between reception of pulses trans-
mitted by pairs of stations in the selected chain. Between any two stations a ship must be located
somewhere along a line of possible positions where the measured Time Difference, TD, between ar-
rival of pulses from those stations would be observed. The TD is measured from the time of reception
of the master station signal to the time of reception of the slave station signal.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "COORDINATE
SYSTEM" + 'ENTER' + "TD" + 'ENTER'
Temperature (Unit)
Sets the temperature unit among C and F. The default setting is C.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "TEMPERATURE" + 'ENTER'
Tide
The periodic rise and fall of the surface of oceans, bays, etc., due principally to the gravitational interac-
tions between the Moon and Earth.
Tide Info
The Tide Info feature is the combination of a new tide heights database that will be included within
new C-CARDs and new features which calculate the tide graph for all primary and secondary ports
world-wide. This function can calculate the tide heights for any past or future date and as a by-product
of this calculation will also display the Maximum and Minimum Tide height and time for the day
selected plus the times of Sunrise and Sunset. At some chart levels, the chartplotter will display a new
Tide Diamond Symbol for every Port or tide point in the database covered by that particular C-CARD.
Tide Stations
Finds the nearest Tide Stations (up to 10) on the map, from the boat position - if a valid fix is received
- or from the cursor position - if the fix position is not good.
'MENU' +"FIND" + 'ENTER' + "TIDE STATIONS" + 'ENTER'
Tides & Currents
Turns On/Off the displaying of Tides and Currents. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Tides & Cur-
rents" + 'ENTER'
Tide & Currents
The new worldwide database with tidal stream information is now available with MAX C-CARDs.
When data/time is available, Tidal stream arrows are shown on the charts, indicating the direction and
strength of the Tide.
Fig. 5g - Tides & Currents
If no data/time is available from the GPS or the chart plotter is not in Simulation mode, the icon on the
map is generic one.
The colour of the arrow denotes the strength of the current as follows: