Lorenz Starlight Pro, User Manual

Page: 17 / 108

19 User Manual
Also the modem C-COM can be connected to the other Ports, in this case set
the format for the selected Port.
2.4.5 EXTERNAL ALARM CONNECTION
To connect the External Alarm device see the following picture:
Fig. 2.4.5 - External Alarm Connection
Once the connection is active, to enable the External Alarm follow the procedure:
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "EX-
TERNAL ALARM" + 'ENTER' + "ON" + 'ENTER'
2.5 ADDITIONAL C-CARDS
The chartplotter uses two types of C-MAP cartridges: either a chart cartridge
or a data storage cartridge. A chart cartridge, called C-CARD, contains detailed charts
of the area covered. A data storage cartridge, called User C-CARD can be used to
permanently store your routes, Waypoints, Marks, Events and tracks (see Par. 4.6).
Note
During normal operations the C-CARD should not be removed since the chart plotter may lock
up.
2.5.1 INSERTING C-CARD
Hold the C-CARD by the short inclined side so that you can see the C-MAP
label.
Fig. 2.5.1 - Inserting C-CARD (I)