72
User Manual
steer the boat reading "X" Mag degree from the compass, you are driving well toward the next Waypoint.
'MENU' +
"ADVANCED SETTINGS" + 'ENTER'
+
"COMPASS" + 'ENTER' + "CALIBRATION" +
'ENTER'
Chain
Selects the chain. The Loran chains are groups of transmitting stations that use timed radio pulse
transmissions. In each of these chains there is a master station and two or more slave or secondary
stations. Stations belonging to a same chain transmit pulses in timing groups: a different time base
identifies each chain. The time base of each chain is the Group Repetition Interval or GRI. This GRI
identifies the chain in unique mode. For example the GRI = 4990 identifies the chain of Central Pacific
zone. The default setting is 9970.
'MENU' +
"ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "COORDINATE
SYSTEM" + 'ENTER' + "TD" + 'ENTER' + "Chain" + 'ENTER'
Change (User C-CARD)
Changes the current User C-CARD.
'MENU' +
"ADVANCED SETTINGS" + 'ENTER'
+
"USER C-CARD" + 'ENTER' + "CHANGE" +
'ENTER'
Chart Boundaries
Enables (On) or disables (Off) the displaying of the Chart Boundaries. Selecting Auto instead, if we are in
background charts only the first charts level contained in the C-CARD are displayed, if we are in a charts
level contained in the C-CARD the next four charts level are displayed. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Chart Bound-
aries" + 'ENTER'
C-Link
Selects the Master unit (Primary Station) or the Slave unit (Secundary Station):
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' + "C-LINK" + 'ENTER'
+ "Secundary Station/Primary Station" + 'ENTER'
Clear (Track)
To clear the stored track.
'MENU' +
"ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "CLEAR" + 'ENTER' +
"YES" + 'ENTER'
COG = Course Over Ground
Direction of the path over ground actually followed by a vessel.
Color (Track)
Selects the desired color for the track.
'MENU' +
"ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "COLOR" + 'ENTER'
Compass (menu)
Sets the desired value for Bearing and Magnetic Variation, and selects the Calibration page.
'MENU' +
"ADVANCED SETTINGS" + 'ENTER' + "C 'ENTER'
Compute Correction
Corrects fixes from the positioning instrument. By placing the cursor on the ship's real position and
selecting this option, the error is calculated and internally memorized for appropriate correction, but
not applied.
'MENU' +
"ADVANCED SETTINGS" + 'ENTER' + "FIX " + 'ENTER' + "COMPUTE CORRECTION" + 'ENTER'
Coordinate System
Sets your preferred Coordinate System among ddd mm ss, ddd mm.mm, ddd mm.mmm, UTM, OSGB,
TD. The default setting is ddd mm.mmm.
'MENU' +
"ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "COORDINATE
SYSTEM" + 'ENTER'
Summary of Contents for Starlight Pro
