Lorenz Starlight Pro, User Manual

Page: 16 / 108

18 User Manual
NMEA 1200-N81-N, NMEA 4800-N81-N, NMEA 4800-N82-N, NMEA 9600-O81-N, NMEA
9600-N81-N (the default setting is 4800-N81-N) and press 'ENTER' to confirm.
To connect the External NMEA to the serial Port 2 see the following picture:
Fig. 2.4.3b - External NMEA Connections on Port 2
To choose your preferred setting follow the procedure:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"PORT 2 INPUT" + 'ENTER'
Then choose your preferred setting among the NMEA available settings NMEA
1200-N81-N, NMEA 4800-N81-N, NMEA 4800-N82-N, NMEA 9600-O81-N, NMEA
9600-N81-N (the default setting is 4800-N81-N) and press 'ENTER' to confirm.
2.4.4 C-COM CONNECTIONS
To connect the modem C-COM to the chart plotter follow the procedure:
1. Connect Power & I/O as follows:
POWER & I/O
WIRE COLOR FUNCTION
BLACK GND/COMMON
RED PWR+ (10-35 Vdc)
WHITE
GREEN
GREY
YELLOW USED BY C-COM
BROWN
USED BY C-COM
USED BY C-COM
BLU OUTPUT EXTERNAL ALARM+
POWER & I/O CONNECTOR
PIN#
1
2
3
4
5
6
7
8
Fig. 2.4.4 - C-COM Connection
Note
The connection is valid for the C-COM IR and C-COM RS232 too.
2. Into the Input/Output menu, set the C-COM for Port 1 as follows:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"PORT 1 INPUT" + 'ENTER' + "C-COM" + 'ENTER'