36
User Manual
3.3.2 DELETING THE A-B-C-D POINTS
Place the cursor on the desired point (A, B, C or D) and press 'CLEAR': the
point is deleted. When the point is deleted, the cursor is placed on the previous
point, if existed. The labels of the next points are renamed.
3.3.3 NAVIGATING ON THE A-B-C-D POINTS
If fix received is good, place the cursor on the desired point A, B, C or D and
press 'GO-TO'. When the ship arrives to the Destination point, navigation follows
to the next point (if existed).
3.4 NAVIGATING TO A SINGLE DESTINATION
3.4.1 DISTANCE AND BEARING TO TARGET
Once you have positioned the cursor on your desired location (a generic
point on the map) press 'GO-TO'.
Fig. 3.4.1 - Navigation to a single destination
On the screen is shown a straight line connecting the Target (called DEST)
with the ship's position and an information window with Target position, that dis-
appears when the cursor is moved from the Target. When the Target is placed, all
navigation data are referred to this Target.
Note
When the chartplotter is turned Off, the Target does not remain in memory.
3.4.2 TIME TO GO
When the Target is set the TTG value is displayed in the Graphic Data page
and in the Navigation page:
Summary of Contents for Compact 7 Plus
