Lorenz Compact 7 Plus, User Manual

Page: 32 / 112

34 User Manual
Differential Correction Source
Allows setting what kind of Differential Correction will be used by the GPS be-
tween WAAS-EGNOS and RTCM (beacon correction). The default setting is WAAS-
EGNOS.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"GPS SETUP" + 'ENTER' + "DIFF CORRECTION SOURCE" + 'ENTER'
Navigation Speed
Allows setting the Navigation Speed among Low Speed, Medium Speed and High
Speed.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"GPS SETUP" + 'ENTER' + "NAVIGATION SPEED" + 'ENTER'
3.2.8.5 Send & Receive Marks/Routes
Sets the desired port used for transferring User Points and Routes functions:
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"SEND/REC ROUTES & MARKS" + 'ENTER' + "Port1/Port2/Port3" + 'ENTER'
3.2.8.6 C-Link
Selects the Master unit (Primary Station) or the Slave unit (Secundary Station):
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"C-LINK" + 'ENTER' + "Secundary Station/Primary Station" + 'ENTER'
3.2.8.7 Cable Wiring Page
Shows a window containing the inteface cable wiring. See Par. 6.3 and 6.4.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' +
"CABLE WIRING" + 'ENTER'
3.2.9 C-VOICE MENU
AVAIBLE IF THE CHARTPLOTTER IS CONNECTED TO THE VOICE NAVIGATION SYSTEM
FOR MORE DATAILS SEE YOUR LOCAL DEALER
The chartplotter has two different vocal modes, Navigation and Echosounder.
According to what mode is selected the messages spoken from the chartplotter are
different.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "C- VOICE" + 'ENTER'
3.2.9.1 Navigation
Enables (On), disables (Off) or insert the time (2, 5, 10, 15 minutes) for the
Navigation Voice mode. If it is On, the message is always sent, as fast as possible. Instead
if it is one among the available values, for example 2 minutes, the message is sent related