Loma IQ3+ST User Manual Download

Page: 76 / 247

Getting Started

Emergency Stop

To stop the machine in an emergency, proceed as follows:

Press the red

Emergency Stop

button, located on the front of the Electrical Services Box.

The conveyor will then automatically stop.

Starting the Machine after an Emergency Stop

To start the machine after an emergency stop, proceed as follows:

Ensure that any issue that caused you to stop the machine has been cleared.

Turn the red

Emergency Stop

button clockwise and then release the button which will then

pop out to its original position. The power supply to the conveyor is now restored.

Push the green section of the

Start/Stop

button to restart the conveyor.

The machine is now ready to start inspecting the selected product.

Summary of Contents for IQ3+ST























































































































































































































































Search results

Summary of Contents for IQ3+ST

Reviews:

Related manuals for IQ3+ST

Brands by name

Popular brands

Loma IQ3+ST, User Manual

Search results

Summary of Contents for IQ3+ST

Reviews:

Related manuals for IQ3+ST

Brands by name

Popular brands