Loma IQ3+ST User Manual Download

Page: 181 / 247

Operating Instructions

171

Tap on the flag to select the language and then tap on the Back button

. The Save

Settings pop-up screen will be displayed. Note that the text is now displayed in French.

Tap on the green tick 'OK' button to save the language change. The text in all screens will
now be displayed in French.

Also see the

Language Setup

screen section for further details.

Setting the Machine ID

The Machine ID is printed out on any Reports or Logs and can be edited to a convenient name to
allow them to be easily associated to a machine.

To add or edit a Machine ID, proceed as follows:

Tap on the control panel area

in the

System Setup

screen. The

System Settings

screen

is displayed.

Tap on the Advanced icon to display the Advanced Settings screen.

Summary of Contents for IQ3+ST























































































































































































































































Search results

Summary of Contents for IQ3+ST

Reviews:

Related manuals for IQ3+ST

Brands by name

Popular brands

Loma IQ3+ST, User Manual

Search results

Summary of Contents for IQ3+ST

Reviews:

Related manuals for IQ3+ST

Brands by name

Popular brands