logos biosystems Luna-FL User Manual Download Page 57

Page: 57 / 80

4.7.3 Enter the file name using the keyboard buttons on the screen. The date and time can be

added by pressing the “Date/Time” button.

Note

: Make sure that the cursor is located in the file name box before entering the file name.

4.7.4 Once the file name is verified, press the “Enter” button to save the image and/or report into the

USB drive. Now, the saved files can be opened after transferring them via USB drive to a PC with

the appropriate software.

Note

: With the Luna-FL software, additional graphical representations of the data and results are

provided in the PDF report, as shown below.

page- Basic Data and Results>

Cell counting data

Protocol used

Cell images (tagged and zoomed)

page- Analytical Histograms>

By cell number (Total/Live/Dead)

By cell concentration (Total/Live/Dead)

By cell clustering

Summary of Contents for Luna-FL

















































































Search results

Summary of Contents for Luna-FL

Reviews:

Related manuals for Luna-FL

Brands by name

Popular brands

logos biosystems Luna-FL, User Manual

Search results

Summary of Contents for Luna-FL

Reviews:

Related manuals for Luna-FL

Brands by name

Popular brands