logos biosystems Luna-FL User Manual Download Page 44

Page: 44 / 80

Note

: After this step, the real image of the cell sample will be displayed on the screen. The cell

image can be navigated by touching the screen and moving the finger or stylus pen on the image.

Please note that the touch screen of the Luna-FL

automated cell counter is a resistive touch

screen, which needs a bit of pressure in order to get a response.

4.3.4 The “Preview” screen in the bright field mode will appear as shown in the image below. Make

sure that users have the best focus. When necessary, adjust the focus with the focus knob on the

right side of the instrument.

Note

: Make sure that the bright field mode is selected to adjust the focus.

Note

: To get the best focus, the image can be magnified by using the

“

Zoom-in

”

button located

Summary of Contents for Luna-FL

















































































Search results

Summary of Contents for Luna-FL

Reviews:

Related manuals for Luna-FL

Brands by name

Popular brands

logos biosystems Luna-FL, User Manual

Search results

Summary of Contents for Luna-FL

Reviews:

Related manuals for Luna-FL

Brands by name

Popular brands