ECHOPLUS-NG SOFTWARE
Logicube EchoPlus-
NG User’s Manual
59
7.
Verify the software version at the top of the ‘Software Updates’ screen.
7.1.2 From USB Drive – Via software download
The latest software can also be downloaded from Logicube’s website and be
placed onto a USB flash drive.
It is recommended to use
an empty USB flash drive.
Download the latest software from the EchoPlus-NG product support page at
https://www.logicube.com/knowledge/echoplus-ng
1.
Download the zip file from the download page.
2.
Extract the contents of the downloaded zip file to the root of the USB
flash drive (the file must not be in any folder). Do not
connect the USB
flash drive yet.
The EchoPlus-NG will display a message when to connect
the USB drive.
If the computer being used to extract the contents of the
downloaded zip file has the software WinZip, or other third-
party zip software, please review
Section 7.1.2.1
before
proceeding.
3.
From the main screen, tap the
Software Updates
icon.
4.
Select
From USB Drive
. The EchoPlus-NG will prompt for the USB drive
to be connected to USB_M.
5.
Connect the USB drive to USB_M. EchoPlus-NG will then check for the
version of the software on the USB drive and will display that version on
the box next to the selected location.
6.
Tap the Update icon to begin the update. A confirmation screen will
appear. Tap
Yes
to continue the update. Do not interrupt the update
process. It may take several minutes. Once completed, a ‘Successful’
screen will appear.
7.
Reboot the EchoPlus-NG by turning the unit off then back on using the
Power switch in the back of the unit.
8.
Verify the software version at the top of the ‘Software Updates’ screen.
7.1.2.1 Extracting the software download on a
computer with WinZip (or other third-party zip
software)
WinZip and other third-party zip software may improperly
extract the files required for the software update. There are
compressed files within the download that need to stay
compressed.
