Logicube EchoPlus-
NG User’s Manual
33
5: Types of Operations
5.0 Types of Operations - Introduction
There are up to 11 types of operation available on the EchoPlus-NG. The left side of the screen
shows the different operation types that can be set. Detailed information on all the different
operations and their screens can be found in this section.
1.
CLONE –
The
EchoPlus-NG has three modes of operation to clone virtually any drive
(Hard Disk Drives or Solid State Drives). Drives can be cloned using
Mirror
(bit-for-bit
copy) or
Clever
.
Drive to Drive –
Clones a drive to one or more Target drives.
Image to Drive –
Restores an image created by the EchoPlus-NG to one or more
Target drives.
Drive to Image –
Creates a Logicube EchoPlus-NG image file to a Target or
Repository. This image file can be restored to drives using the Image to Drive
mode.
Details on the different screens found in the Clone operation can be found in
Chapter 4: Clone
.
2.
HASH –
Perform a SHA1, SHA-256, or MD5 hash of a drive. This can also verify the hash
of the drive by entering an “expected value” for the hash.
