TYPES OF OPERATIONS
Logicube EchoPlus-
NG User’s Manual
49
2.
From the main prompt, type
command,
then press the
enter key.
3.
Type
config
then press the enter key.
4.
Type
db list
then press the enter key. This will show a
list of databases or configurations saved. The db that
shows an asterisk (*) before the name is the current
database or configuration being loaded each time the
EchoPlus-NG is turned on.
5.
Type
db
load initial.db
then press the Enter key to load
the default database. There should be a response
showing “Command (DbManagement) Successful”.
6.
Type
db list
again and there should be an asterisk (*) on
initial.db.
7.
Turn the EchoPlus-NG off using the power switch
located in the back of the device, and close the
Telnet/SSH application.
8.
Wait for the EchoPlus-NG to completely turn off then
turn it back on. When the EchoPlus-NG boots up, it will
load the default configuration. The default
configuration can be checked by going to
System
Settings
and looking at the
Profiles
tab. INITIAL.DB
should have an asterisk next to it.
5.6.3 Language/Time Zone
The EchoPlus-NG’s menu system’s language can be changed. The available
languages are English, Chinese (
中文
), and Korean (
한국어
).
This screen also allows the time zone to be set.
5.6.3.1 Language
Four languages are available. Select English, Chinese (
中文
), or
Korean (
한국어
) to change the language displayed. As soon as
the selection is made, the EchoPlus-NG’s screen (or the
computer’s Internet browser) will automatically refresh and
display the selected language.
The
Custom
button is reserved for future
language releases.
