DEFAULT PASSWORDS
Logicube EchoPlus-
NG User’s Manual
55
7.
Next, type the following command:
sudo smbpasswd logicube
8.
The following prompt will appear:
New SMB password:
9.
Type the same password you used in step 5 above. The following
prompt will appear:
Retype new SMB password:
10.
Type the same password again, then press the Enter key. The Logicube
prompt should appear.
11.
Next, to change the “it” password, type the following command then
press the Enter key:
sudo passwd it
12.
The following prompt will appear:
Enter new UNIX password:
13.
Type a new password then press the Enter key. The following prompt
will appear:
Enter new UNIX password:
14.
Type the new password again then press the Enter key. The following
response should appear:
passwd: password updated successfully
15.
Next, type the following command:
sudo smbpasswd it
16.
The following prompt will appear:
New SMB password:
17.
Type the same password you used in step 5 above. The following
prompt will appear:
Retype new SMB password:
18.
Type the same password again, then press the Enter key. The Logicube
prompt should appear.
19.
Type the following command then press the Enter key:
sudo mount -o remount,ro /
20.
Press the following key combinations to go back to the Graphical User
Interface:
Alt+1
6.0.2 Changing only the
logicube
password
For the username: logicube
