CLONE
Logicube EchoPlus-
NG User’s Manual
30
4.3.5 Hash/Verification Method
This setting can be found in Drive to Drive, Drive to File, and File to File and
allows the user to set a hash method and/or a verification method.
The Verification setting is available with the purchase and
activation of the Verification Option. To purchase this option,
contact the Logicube Sales Department at
.
Hash Method –
Will hash the Master drive with the selected method. There are
two or four hash algorithm options available, depending on which cloning mode
is selected:
None –
No hash of the Master will be performed. This is available only
when using the following mode:
o
Drive to Drive
SHA-1 –
Uses the SHA-1 algorithm to hash the Master. This is available
in the following modes:
o
Image to Drive – Non-selectable. The EchoPlus-NG will use SHA-
1 if the Image File was created using SHA-1.
o
Drive to Image
SHA-256 –
Uses the SHA-256 algorithm to hash the Master. This is
available in the following modes:
o
Image to Drive – Non-selectable. The EchoPlus-NG will use SHA-
256 if the Image File was created using SHA-1.
o
Drive to Image
MD5 –
Uses the MD5 algorithm to hash the Master. This is available
only when using the following mode:
o
Drive to Drive
Verify –
Select
YES
to automatically verify the hash of the Target matches the
value of the Master’s hash value.
4.4 Target
Tap this icon to select which drive or image file will be used as the Target drive or image. When
‘DRIVE TO DRIVE’ or ‘IMAGE TO DRIVE’ is chosen from the Mode settings, this will show the
different drives connected to the EchoPlus-NG. When ‘DRIVE TO IMAGE’ is chosen from the
Mode settings, this will show the repository screen which contains the different images located
on the EchoPlus-NG’s repository drive.
