Installation
WeftMaster CUT-iT Dornier
www.loepfe.com
41
5.6.3
Specifying Slave addresses
Specify Slave adresses in consecutive sequence!
n
Slave 1 = Add: 1
n
Slave 2 = Add: 2
n
Slave 3 = Add: 3
n
Slave 4 = Add: 4 and so forth ...
ü
Device connected to 24 V DC-SELV supply.
1.
Press.
ð
Startup phase runs.
2.
Keep pressed during the startup phase.
ð
Display:
«Select Address, Add: 0»
3.
Press to confirm address (Slave).
4. Start Slave numbering with 1.
ð
Bus address = 0: WeftMaster CUT-iT Dornier is configured as Slave (e.g. Add: 1)
5.
Press to confirm address (Slave).
6.
Press to specify desired number of Slaves (max. 32).
7.
Press to confirm number of Slaves.
ð
The number of Slaves is specified (example: 3 Slaves).
ð
WeftMaster CUT-iT Dornier restarts.
