Operation
22
www.loepfe.com
WeftMaster CUT-iT Dornier
ð
Value of selected parameter is displayed.
ð
Display (e.g.):
«Parameter: 85 / value: 1»
8.
Press to select desired setting.
9.
Press to confirm setting.
ð
Confirmed value blinks 3x.
ð
Setting is saved.
10.
Press to exit Program Change mode.
ð
WeftMaster CUT-iT Dornier returns to Standby mode.
Parameter list
All system settings can be seen in a list.
*
These values are changed in the settings
«Tune-Standby»
or
«Tune-Run»
(see Instruction Manual, Setting
the current strength 4.3.7)
Parameter list column description
Column
Column description
Parameter
Parameter number
Function
Function of corresponding parameter
Min. value
Minimum value that can be set
Max. value
Maximum value that can be set
One unit
Smallest changeable value of the corresponding unit
Standard value
Standard value of corresponding parameter
Unit
Unit of corresponding value
Description
Function description
Default system parameters
Param-
eter
Function
Min.
value
Max.
value
One
unit
Stan-
dard
value
Unit Description
0
Setting mode
0
1
0
«0»
: Change parameters de-
activated. Parameters cannot
be changed.
«1»
: Change parameters acti-
vated. Parameters can be
changed.
