Installation
WeftMaster CUT-iT Dornier
www.loepfe.com
39
5.6
Specifying Master/Slave addresses
Only have this carried out by qualified personnel!
This setting can only be initialized during the startup phase!
Activating
when changing settings interrupts the process and Setting mode is
exited without saving the changes.
5.6.1
Specifying the Master address (without Slave)
ü
Device connected to 24 V DC-SELV supply.
1.
Press.
ð
Startup phase runs.
2.
Keep pressed during the startup phase.
ð
Display:
«Select Address, Add: 0»
ð
Bus address = 0: WeftMaster CUT-iT Dornier configured as Master.
3.
Press to confirm address (Master).
4.
Press to set number of Slaves to 0.
5.
Press to confirm number of Slaves.
ð
The number of Slaves is specified (0 Slaves).
ð
WeftMaster CUT-iT Dornier restarts.
