Installation
34
www.loepfe.com
WeftMaster CUT-iT Dornier
5.3.3
Connecting the heat cutters
Use a 6 mm² cable for the connection.
n
Avoid large wiring loops. Lay wires together (parallel).
ü
The weaving machine is stopped.
ü
The device is disconnected from the power circuit.
1. Connect the connection leads of the heat cutters to the connection terminals of the WeftMaster CUT-
iT Dornier.
24 V DC
- +
Run
Connection correct
Connection incorrect. Lay wires
together (parallel).
Lay wires together (parallel).
