Safety
12
www.loepfe.com
WeftMaster CUT-iT Dornier
2.5.1
Fire prevention measures
WARNING
Risk of fire due to hot heat cutters
Disregarding the following measures leads to fire risks and therefore risk of injury.
4
Installation, setting and operating the WeftMaster CUT-iT Dornier only by
authorized personnel.
4
Set running and idle temperatures of cutting wires as low as possible.
4
Pay utmost attention when blowing-off and cleaning weaving machines with
WeftMaster CUT-iT Dornier connected.
4
Do not run weaving machines fitted with WeftMaster CUT-iT Dornier without
supervision.
4
Do not lay objects on or over the heat cutters.
4
Have suitable fire extinguishers available in case of fire.
WARNING
Risk of fire due to short-circuit
Disregarding the following measures leads to fire risks due to short-circuit. Risk of
injury due to fire risks.
4
Fit heat cutters offset to each other to separate electroconductive yarns (e.g.
Lurex).
4
Only fit the heat cutters with the WeftMaster CUT-iT Dornier switched off.