Operation
WeftMaster CUT-iT Dornier
www.loepfe.com
21
4.3
Advanced functions
4.3.1
Changing system parameters
Only have this carried out by qualified personnel!
This setting can only be initialized during the startup phase!
Activating
when changing settings interrupts the process and Setting mode is
exited without saving the changes.
ü
Device connected to power supply.
1.
Press.
ð
Startup phase runs.
2.
Keep pressed during the startup phase.
ð
Display:
«Parameter: 0»
3.
Release
ð
Display:
«Parameter: 0 / value: 0»
4.
Press to change value from
«0»
to
«1»
.
5.
Press to confirm setting.
ð
Confirmed value blinks 3x.
ð
Activation of program change confirmed.
6.
Press to select desired parameter.
ð
Display (e.g.):
«Parameter: 85»
7.
Press to confirm selected parameter.