Lode BV
Excalibur Sport
58
To edit an existing protocol, you have to select the desired protocol first. You can change the
name or confirm the name with NEXT
( )
ten times. Now you can walk through the stages
with the confirmation button, until you reach the stage you want to edit. You have to scroll
through the total protocol and define the recovery stage before you leave this menu otherwise
the changes will not be saved.
B.3.8.3
Protocol Run
The menu Protocol Run is used to select the desired protocol for the exercise test. Select
Protocol Run and three previously programmed protocols will appear on screen. To scroll
through the total list use the arrows, for instance:
If you want to select e.g. the protocol 10 w min, use the
▼
key until a space appears in front
of the name of the protocol (the selectable item is always on the 2
nd
line) and confirm with ok.
The following message will appear on screen:
This screen is used to
check the selected
protocol; in this case the name is 10w min: the first step will start with 10 watt for 1 minute.
Press the confirmation button to go on:
The ergometer is ready for use with the selected protocol. When the test subject exceeds the
30 rpm the protocol will run. You will see the following screen:
10w min
25w 2 min
ramp 400w
esc ok
10w min
1 P=0W t=00:00
1S dP=+10W dt=060s
esc ok
10w min
start at 30 rpm
n= 0/min
esc ok
1 t=00:59
θ
=00:01
P= 10 W 58 rpm
♥
= 83/min
rec rec
Summary of Contents for 925900
Page 34: ...Lode BV Excalibur Sport 34...