Lode BV
Excalibur Sport
26
6.1.4
Torque
Switch ON or OFF the torque in the readout. The torque is displayed in Newton meter. The
torque (T) is coupled to Workload (P) and RPM (n) by the formula:
P [W] = ( 2 *
π
* n [min
-1
]
* T [Nm] ) / 60
So when the workload is modified and P-slope (6.2) is at 25 W/s, the actual torque changes
with the same speed (incorporating RPM for exact rate).
Example of RPM and torque readout in terminal mode:
6.1.5
Timer
Switch the Timer ON or OFF in the readout. The timer is shown in the display as:
Θ
=
mm:ss
, indicating the time in minutes and seconds. The timer starts when you enter manual,
terminal or analog mode and the RPM increases above 30. When the RPM drops below 30
during the exercise test the timer will stop until the RPM of 30 is reached again. The timer is
reset when one of these modes is left. Example of workload and timer readout in manual
mode:
6.1.6
Distance
TORQUE
Off
DISTANCE
On
60 rpm T= 8.9Nm
TERMINAL
P= 100W
Θ
=01:34
P MANUAL
TIMER
Off
Summary of Contents for 925900
Page 34: ...Lode BV Excalibur Sport 34...
