Lode 925900, User Manual

Page: 19 / 89

Lode BV Excalibur Sport
19
!
0 Watt Start-up System (0W) part. no. 925805
The 0 Watt Start-up System is an option with the Excalibur Sport. The 0 Watt Startup System
gives the opportunity to start the ergometer without load (0 watt) at a preset pedal speed
(rpm). You can choose any pedal speed between 30 and 80 rpm. The number of revolutions is
increased from 0 to the required rpm by means of a motor drive. With this option there is no
energy-loss due to the start-up phase. This option has to be built-in in the ergometer while
manufacturing and cannot be added later on.
!
Blood Pressure (B) Option part. no. 928818
The B Option is an option for the Excalibur Sport (not to be used during arm-ergometry). The
B option allows you to measure the blood pressure of a test subject automatically before,
during or after the exercise test. The B Option consists of a cuff with hoses and connectors for
full blood pressure measurement possibilities.
Please note that installation of the BP option involves having to alter the wire systems inside
the ergometer; the option should only be installed by service personnel in order not to make
your warranty invalid.
!
Heart rate (HR) option part. no. 928826
The heart rate option offers full monitoring facilities and can be readout via the display or
over the RS232 port. You can create your own heart rate controlled protocols when you have
ordered the P Option (928811) as well. The heart rate monitoring system consists of a Polar
belt and a receiver. The receiver should be installed in the display unit of the ergometer or
placed in front of the Test Subject.
For more available options see 7.4 Options. For installation and use of these options is
referred to the Appendices.