Lode BV
Excalibur Sport
42
A
Maintenance
The Lode Ergometer is mechanically and electronically designed for durability and accuracy.
This also accounts for the options and add-ons of the device. The frequency of calibration
depends on the intensity of usage. As a rule Lode Ergometers are calibrated on an annual
basis. Please refer to the Service Manual for specific details on check-up intervals for the
Lode Ergometer and its options and/or add-ons.
The safety and integrity designed into the machine can only be maintained when the Lode
Ergometer is regularly examined for damage and repair. It is the sole responsibility of the
user/owner or facility operator to ensure that regular maintenance is performed. Worn or
damaged components shall be replaced immediately or the exercise bicycle removed from
service until the repair is made. Only manufacturer-supplied components shall be used to
maintain/repair the equipment. Please note these facts.
The dynamic calibration is performed using calibration equipment specially designed by the
manufacturer.
A.1
Cleaning
The housing of the Excalibur Sport ergometer and all other external surfaces can be cleaned
with a cloth dampened with non-aggressive liquid.
A.2
Replacing fuses
You will not need a certified technician to replace fuses of the Excalibur Sport. Execute the
following steps to do this:
Always disconnect the power cord first!
Unplug the mains cable. The fuses are part of the main unit. Unscrew the fuse holders with a
screwdriver, replace the broken one and place them back again. Note: make sure that the fuses
that are in the Excalibur Sport match the set voltage (115 V: 2 x 1,25 A slow; 230 V :2 x 0,63
A slow).
Contact your local dealer for a maintenance contract or ask Lode:
LODE
BV
Tel.
+31
50
5712811
Service
department
Fax.
+31
50
5716746
Zernikepark 16
9747 AN GRONINGEN
Email:
The
Netherlands
Internet:
www.lode.nl
Summary of Contents for 925900
Page 34: ...Lode BV Excalibur Sport 34...
