Note
: Use These Instructions for
ULC Installations
Securing an installation without Terminal Strip
Connections.
Use this method of securing the installation before closing the enclosure where
all the outside attachments and connections do not use the terminal strip. See
illustration below.
1.
Loop a small cable tie through the slot in the terminal access port.
2.
Wrap this cable tie around all the cables, gently directing them towards the
port of the enclosure.
7. Securing Outside or Port Connections
Note:
The cable ties should be tightened and trimmed before closing
the enclosure. They are shown loose and untrimmed in both these
illustrations for clarity.
Note:
LoBenn recommends that the LNI 2000 be wall mounted.
LoBenn also recommends that there be a cable #4 strap placed, using
a #6 ¾ inch screw, within nine ( 9 ) inches of the LNI supporting all
cables and wires if conduit is not used.
LNI 2000 Installation Manual
24
