Note
: Use These Instructions for
ULC Installations
Step Three: Program the LNI 2000
Note:
The LNI 2000 may be pre-programmed prior to installation. To pre-
program, power the LNI 2000 with a listed 12V DC adapter plugged into
the Power port on the front of the LNI 2000.
1.
Connect the LNI 2000 to a PC through the “Local” port.
2.
Open a web browser. Type 172.21.32.43 into the browser address bar. This
IP address is shown on the LNI 2000 label on the underside of the LNI
2000. An initial password screen will display.
3.
Enter the UserName “admin” and the Password “admin”.
4.
The LoBenn LNI Configuration
screen will display.
LNI 2000 Installation Manual
16