LNS GT 112-E, Instruction Manual

Page: 104 / 201

Chapter 8 OPERATION
8 - 29
GT 112-E
＊
Refer to the timing chart <4> on 8.6.2.1
18 R3 turns on at EOB and turns off
(Refer to INTERFACE17, 19, 20, 31, 32, 33 for related setup)
Defines when R3 signal turns OFF.
1 R3 signal turns OFF when A3 signal is activated and
the pusher retracts back to home position.
2 R3 signal turns OFF when the last machining is
finished and the lathe chuck opens.
＊
Refer to the timing chart <4> on 8.6.2.1
19 R3 turns ON at EOB and turns OFF
(Refer to INTERFACE17, 18, 20, 31, 32, 33 for related setup)
Defines when R3 signal turns OFF.
1 R3 signal turns OFF when A3 signal is activated
and the pusher retracts back to home position.
2 R3 signal turns OFF when the new bar reaches
Top Cut position
＊
Refer to the timing chart <4> on 8.6.2.1
20 R3 pulses for 2 sec. at End of Bar
(Refer to INTERFACE17, 18, 19, 31, 32, 33 for related setup)