LNC-T800
LNC Controller Operation Instruction
LNC Technology Co., Ltd.
91
2.2.5
Delete Data Segment
To delete a single line of data, move cursor to the line and click
【LDEL】
to delete the line. To delete a
segment of data, take the following procedures.
1. Switch to Edit mode and make sure machine preparation is done.
2. Click
【
FGPROG
】
function button to switch to program edit screen.
3. Move cursor to the first line of the segment to be deleted.
4. Click
【
NEXT
】
to switch function button list and find
【
MARK
】
function button. Click it to highlight the
line.
5. Move cursor to the last line of the segment to be deleted.
6. Click
【
MARK
】
again to highlight the whole segment. Click
【LDEL】
, and the highlighted segment will
be deleted.
2.2.6
Teach Input
When compiling a program, after moving the machine to a certain position in manual modes such as JOG,
RAPID, and MPG, etc., system can automatically write absolute coordinates of the position into the program.
The method with which the program is generated is as the following.
1. Switch to Edit mode and make sure machine preparation is done.
2. Click
【
FGPROG
】
function button to switch to program edit screen.
3. Click
【
NEXT
】
to switch function button list, and find
【
THINMOD
E】
function button.
4. Click
【
THINMOD
E】
function button, and then it disappears, but instead, function buttons of Cancel
Teach and Insert appear.
5. Switch to any manual mode, such as JOG, RAPID, MPG, etc., and move machine to desired position.
6. Click
【
THININST
】
, and the current coordinates will be input to program.
7. When Teach Input is done, click
【
THINCANC
】
function button to cancel teach mode, and then buttons
of Cancel Teach and Insert disappear, but Teach button appear.
Summary of Contents for LNC-T800
Page 2: ......
