LNC LNC-T800 Operator'S Manual Download Page 91

Page: 91 / 100

LNC-T800

LNC Controller Operation Instruction

LNC Technology Co., Ltd.

LNC Controller Operation Instruction

2.1 Introduction of File Operation

2.1.1

Open File

The 1

step to start manufacturing is to open manufacturing program. Open File is divided to open a new file

and open an existing file. Instructions are as the following.

Open Existing File:

1. Switch to Edit Mode (EDIT), and make sure machine is currently in the status of preparation done.

2. Switch to <PROG> module.

3. Click

【

DIRMNG

】

function button to switch to File Manager screen.

4. Click Up, Down buttons to move cursor to the file to be opened.

5. Click <INPUT>function button to open an existing file.

Open new file:

1. Switch to Edit Mode (EDIT), and make sure machine is currently in the status of preparation done.

2. Switch to <PROG> module.

3. Click

【

DIRMNG

】

function button to switch to File Manager screen.

4. In the Input Line, enter a new file name.

5. Click <INPUT>function button to open the new file.

2.1.2

Copy File

2.1.2.1

Copy File from Disk to Controller

Instruction of operation procedures is as the following:

1. Switch to Edit Mode (EDIT), and make sure machine is currently in the status of preparation done.

2. Switch to <PROG> module.

3. Click

【

DIRMNG

】

function button to switch to File Manager screen.

4. Insert the disk containing part programs to FDD.

5. Click

【

COPY A>C

】

function button, and a file list of the files in the disk appears. Move cursor to select

the files to be copied, and click

【

】

button.

6. After

clicking

【

】

button, the destination file use the source file’s name as the default file name, if want

to use a different file name, manually input the name and click

【

】

button to finish copy.

Summary of Contents for LNC-T800





































































































Search results

Summary of Contents for LNC-T800

Reviews:

Related manuals for LNC-T800

Brands by name

Popular brands

LNC LNC-T800, Operator'S Manual

Search results

Summary of Contents for LNC-T800

Reviews:

Related manuals for LNC-T800

Brands by name

Popular brands