LNC LNC-T800 Operator'S Manual Download Page 100

Page: 100 / 100

LNC-T800

LNC Controller Operation Instruction

LNC Technology Co., Ltd.

2.13 Restore System Parameter

If the storage devices of machine break down, or the storage devices have to be replaced, and the backup of

parameters has to be led in, refer to following instructions to proceed to the process.
1. Insert the disk containing parameter backup to FDD.

2. Click emergent stop to let machine enter the NO-RDY status.

3. Switch to <DGNOS> group.

4. Click

【

SUSUPD

】

function button to switch to system upgrade operation screen.

5. Use UP, Down buttons to move cursor to parameter lead-in position and click

【

】

button.

6. Click

【

ALL

】

function button to select all parameter categories and click

【

】

button.

7. Use UP, Down buttons to move cursor to GENERAL DISK/NET Method and click

【

】

button.

8. Clear the displayed folder path, and input A:\. Click

【

】

button. Users will be asked to confirm the

process. Click

【

】

to start parameter lead-in. When the process is done, system will reboot

automatically.

Summary of Contents for LNC-T800





































































































Search results

Summary of Contents for LNC-T800

Reviews:

Related manuals for LNC-T800

Brands by name

Popular brands

LNC LNC-T800, Operator'S Manual

Search results

Summary of Contents for LNC-T800

Reviews:

Related manuals for LNC-T800

Brands by name

Popular brands