LNC-T800
LNC Controller Operation Instruction
92
LNC Technology Co., Ltd.
2.3 Manual Data Input (MDI)
During manufacturing, if want to independently execute certain segments of program commands, it can be
done in this mode. The method is as the following.
1. Switch to MDI mode, and make sure machine preparation is done.
2. Switch to <PROG> module.
3. Click
【
MDI
】
function button to switch to Manual Input screen.
4. Edit the program to be executed in edit screen.
5. When compilation is done, click cycle start, then the edited manufacturing program will be executed.
2.4 Execution of Part Program
The method to execute manufacturing program after opening a file or editing a part program is as the
following.
1. Make sure the current manufacturing program is the one to be executed.
2. Switch to MEM Mode, and make sure machine is currently in the status of preparation done.
3. Click Cycle Start.
2.5 Origin Return (HOME)
Before executing manufacturing, proceed to Origin Return process to assure the correctness of coordinates.
The method is as the following.
1. Switch to HOME mode, and make sure machine preparation is done.
2. Click the axis direction button which has to return to origin. (X+, Y+, Z+…)
3. After Origin Return, make sure axis direction indicator is alight. If yes, the axis’ Origin Return process is
done.
2.6 Instruction on JOG Operation
The method to move machine in JOG mode is as the following.
1. Switch to JOG mode, and make sure machine preparation is done.
2. Depending on the direction to move to, click corresponding direction buttons, e.g. X+, X-, Y+, Y-….
2.7 Instruction on MPG Operation
The method to move machine in MPG mode is as the following.
1. Switch to MPG mode, and make sure machine preparation is done.
2. Select the desired axis direction to move to on MPG.
3. Select movement magnification on MPG. The bigger the magnification is, the faster the machine moves.
4. After setting is done, rotate MPG to move the machine.
Summary of Contents for LNC-T800
Page 2: ......
