LNC LNC-T800 Operator'S Manual Download Page 41

Page: 41 / 100

LNC-T800

CNC Group Instruction

LNC Technology Co., Ltd.

3. Select

【

1.POU YUEN SOFTWARE

】

to switch to the screen as the following figure.

Figure 1.4-24

Introduction of function buttons

【

SEL

】

【

USEL

】

【

ALL

】

and

【

UALL

】

are effective only when the cursor is at the file list

【

】：

After selecting the file to download, click

【

】

to move to the next step.

【

SEL

】：

Add the file where the cursor is to the list for download. The file selected is marked

with an asterisk (*) in front of it.

【

USEL

】：

Delete selected file from the list. The asterisk will then disappear.

【

ALL

】：

Select all the files on the list.

【

UALL

】：

Cancel the selection of all the files.

【

CANCEL

】：

Cancel the function of file download.

Introduction of the operation of columns is as the following.

a. At the column showing a single file name, click Up or Down to switch to file list.

b. At file list, click Right or Left to switch to the column showing a single file name.

Introduction of Download function

a. When executing this function, make sure hardware connection is normal, and the PC has

to run LNCTools which is developed by our company. Make sure also the communication

protocols of both sides are consistent.

b. Select files on NC side to be downloaded.

c. If download a file only, move cursor to the desired file and click

【

YES

】

Summary of Contents for LNC-T800





































































































Search results

Summary of Contents for LNC-T800

Reviews:

Related manuals for LNC-T800

Brands by name

Popular brands

LNC LNC-T800, Operator'S Manual

Search results

Summary of Contents for LNC-T800

Reviews:

Related manuals for LNC-T800

Brands by name

Popular brands