LivaNova VNS Therapy 250 Physician'S Manual Download | Manualshive

Page: 76 / 92

background image

76 of 92 — 26-0008-1100/5

(Worldwide)

Physician’s Manual — VNS Therapy Programming Software (8.1)

Figure 43.

Low Battery/End of Service Indications Prior to
Surgery, Outside of the Sterile Field - Initial
Implant or Pulse Generator Replacement

Battery Status Indicator or Message encountered:

IFI, N EOS, or EOS = Yes

.

Warning message - "The Intensified Follow-up Indicator (IFI) has been set for the Pulse Generator. More
frequent clinical monitoring is recommended. If you have any questions, please consult the Physician's Manual
or contact Cyberonics."
Warning message - "The Pulse Generator is nearing End of Service (N EOS). It is recommended that the Pulse
Generator be replaced as soon as possible. If you have any questions, please consult the Physician's Manual or
contact Cyberonics."
Warning message - "The Pulse Generator has reached End of Service (EOS) and is NOT supplying stimulation.
It is recommended that the Pulse Generator be replaced immediately. If you have any questions, please consult
the Physician's Manual or contact Cyberonics."
Warning message – “The Pulse Generator is currently disabled due to a Vbat< EOS threshold. Note that the
generator is NOT supplying stimulation. It is recommended that you contact Cyberonics or refer to the
Physician’s Manual.”

Perform System Diagnostics or Generator
Diagnostics with device in sterile package.
Record results.

Evaluate Diagnostic Results

Lead Impedance “any”
Impedance Value “any”

IFI = No

Proceed with implant.

Contact Cyberonics’ Clinical Technical
Support at

1 (866) 882-8804 (U.S. and

Canada) or +1 (281) 228-7330 (Worldwide)

.

Wait approximately 30 minutes

with Generator at room

temperature.

First time...

Second time...

Battery Status Indicator or Message encountered:

IFI, N EOS, or EOS = Yes

.

Warning message - "The Intensified Follow-up Indicator (IFI) has been set for
the Pulse Generator. More frequent clinical monitoring is recommended. If you
have any questions, please consult the Physician's Manual or contact
Cyberonics."
Warning message - "The Pulse Generator is nearing End of Service (N EOS). It
is recommended that the Pulse Generator be replaced as soon as possible. If
you have any questions, please consult the Physician's Manual or contact
Cyberonics."
Warning message - "The Pulse Generator has reached End of Service (EOS)
and is NOT supplying stimulation. It is recommended that the Pulse Generator
be replaced immediately. If you have any questions, please consult the
Physician's Manual or contact Cyberonics."
Warning message – “The Pulse Generator is currently disabled due to a Vbat<
EOS threshold. Note that the generator is NOT supplying stimulation. It is
recommended that you contact Cyberonics or refer to the Physician’s Manual.”

«
...
74
75
76
77
78
...
»

Summary of Contents for VNS Therapy 250





























































































Reviews:

No comments

Related manuals for VNS Therapy 250

Brand: Unitech Pages: 54

Brand: T-Mobile Pages: 178

PEG-TG50 - Personal Entertainment Organizer

Brand: Sony Pages: 1

PEG-SJ33 CLIE Handbook (primary manual)

Brand: Sony Pages: 1

PEG-SJ30 - Clie Color Handheld

Brand: Sony Pages: 1

PEG-TJ37 - Personal Entertainment Organizer

Brand: Sony Pages: 24

PEG-T415 - Personal Entertainment Organizer

Brand: Sony Pages: 30

PEG-SJ33 CLIE Handbook (primary manual)

Brand: Sony Pages: 80

Brand: Vax Pages: 12

Brand: Unitech Pages: 31

Brand: Palm Pages: 2

Toughbook CF-P1 Series

Brand: Panasonic Pages: 4

Brand: Husky Pages: 8

Brand: Dolphin Pages: 192

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands