57
Time Shift
Please note that if the source materials you are viewing are copy-protected, you will not be able to make use of
the ‘Time Shift’ function.
Before you start
► Check whether you have switched your TV’s input source to corresponding option (e.g. VIDEO 1, LINE 2, etc.),
so that signal from the DVD recorder can appear on screen. For further information, please check the instruction
manual offered by your TV manufacturer.
► Check whether the channel scanning process for your TV is completed.
Setup Menu (Tuner) (p.24)
Time Shift
Pause Live TV
1
Press
CH+
and
CH-
to select a desired channel.
2
Press
TIME SHIFT
to pause the program you are
currently watching.
The scene displayed on the TV screen will be the last
picture shown when you press TIME SHIFT.
3
Press
PLAY
when you decide to go back to
watch the program. The program will then be
played back from where it is interrupted.
4
Press
PAUSE/STEP
to pause playback.
Press
PLAY
again to resume playback.
Press
F. F.
to fast-forward playack.
Press
F. R.
to rewind playack.
5
Press
TIME SHIFT
to switch off the function, and
return to the normal TV-viewing mode.
The maximum time for live program pause is 2 hours.
Record & Play
1
During recording or timer recording, press
PLAY
to start playback of contents recorded on the hard
drive.
2
Playback will then start from beginning of the
recorded session.
3
Press
PAUSE/STEP
to pause playback.
Press
PLAY
again to resume playback.
Press
STOP
to stop playback.
Press
STOP
again to stop the recording
completely.
The function is applicable to video titles recorded on
hard drive only.
You can only use this function when the recording
has been in progress for at least 10 seconds.
