Dive Computer
User Manual
Liquivision Products, Inc
-
74
-
Revision 1.9 Software 1.17
This method of surface pressure detection has proven quite reliable, but it is always possible to trick
your KAON, for example:
•
if you place your KAON in shallow and very stable body of water (such as a bucket full of dive
gear being rinsed), your KAON may assume that current surface pressure is more than it is in
reality. If you go diving immediately after this, your depth reading may be distorted.
•
if you increase ambient pressure very quickly after the KAON has adjusted for being at altitude
(e.g. if you were to skydive with a KAON), it might go into a phantom dive, as it will assume
that you have entered the water. In this highly unlikely case, the only solution is to reset your
KAON by removing the battery (please refer to the
details).
You can always check what KAON assumes as the current surface pressure by going to the “Status”
screen (please refer to
