Liquivision kaon, User Manual

Page: 38 / 107

Dive Computer
User Manual
Liquivision Products, Inc -
38
- Revision 1.9 Software 1.17
This setting changes whether or not ascent/descent rates will be displayed. It will show the rate as a
number of meters or feet per minute, and an arrow showing whether you are ascending or descending.
6.5. Velocity
Velocity off or not ascending/descending Velocity on – descending at 30mpm (current units - metric)
While this setting is visible in the “
6.6. Stopwatch DF (only in Gauge Mode)
Display Settings ” menu of both Deco Mode and Gauge Mode, the
stopwatch is only available when your KAON is running in Gauge Mode.
This setting lets you control whether the stopwatch will be on at the beginning of a new dive in Gauge
Mode. The default setting is “Off”. This means that if you want to use Stopwatch during your dive, you
will need to turn it “ON” first. If you change this setting to “ON”, the default behavior of the
Stopwatch will be to turn on at the start of the dive. Once you turn the Stopwatch “ON”, it will remain
on for the remainder of the dive (unless you turn it back off). For details refer to “
Stopwatch ” section.
While this setting is visible in the “
6.7 Dark Mode (only in Gauge Mode)
Display Settings ” menu of both Deco Mode and Gauge Mode, Dark
Mode is only available when your KAON is running in Gauge Mode. This option enables selecting one
of three low brightness color schemes for the underwater dive screen. The default setting is “None” and
the Dark Mode On/Off option is not available in the underwater menu.
There are three under water dive screen color schemes available for selection:
Dark Mode : Dim
(Data in dim green color)
Dark Mode: Blank
(Nothing is displayed)
Dark Mode: Stlth
(Data in dim red color)