Dive Computer
User Manual
Liquivision Products, Inc
-
40
-
Revision 1.9 Software 1.17
Choosing this option will take you to a sub-menu, where you can choose colors for different parts of
your display. You can set the colors of the following values:
6.10. Colors
●
Depth
●
Total dive time
●
Maximum depth
●
Maximum depth label („MAX” printed on the screen)
●
Unit label
●
Gas / Setpoint
●
Time of day
●
Temperature
●
Depth units
●
Menu text
●
Menu parameters
Scroll down to the value you wish to change by tapping “Down”. Tap “Left” to move the cursor over to
the color indicator for that value. You can then scroll through all available colors by tapping Up or
Down. Once you reach a color that you like, you can tap “Right” to return to the list of values. Once
you have completed all the changes you wish to make, scroll all the way down until you reach “Exit”.
To reset the colors to the factory settings, place your cursor on
“All Colors”. Tap “Right” once to confirm, then tap “Down”
twice to place your cursor on “Factory Default”. Tap “Right” to
confirm that you want to rest the colors to the factory settings.
The final item in the “Display” menu is “Simulate Dive”. This is so you can test all your display
settings, without getting yourself or your KAON wet. When you enter “Simulation”, it will open sub-
menu asking you for depth and time of the dive, its speed (whether it’s normal – 1x, or faster – 2x, 4x)
and then you can select “Start”.
6.11. Simulate Dive
A couple of things to note about the KAON simulator:
•
The simulator follows descent and ascent rate limits
•
It takes a moment to turn on, since the simulation starts at 0m / 0ft but the KAON considers a dive
after divers descends below 1.6m / 5.25ft
•
If the time you set is too short to reach the specified depth, the simulator will just keep descending
for the allotted time, and then start ascending without reaching the depth you specified
•
Please note that the Auto Dim option is not available during a simulation
•
You can stop the simulation at any time by tapping the unit 3/5 times to enter the underwater menus,
and choosing “Stop Simulation” (to learn more, refer to the “
” section of the manual.)
