Dive Computer
User Manual
Liquivision Products, Inc
-
55
-
Revision 1.9 Software 1.17
Diving within NDL Limit
STANDARD: Deco Plan
Showing STOP/FOR
GRAPHIC: Deco Plan
Showing STOP/FOR
STANDARD: At Stop
Showing STOP
STANDARD: At Stop
Showing STOP
•
NDL – No Decompression Limit is the maximum time you can stay at your current depth
before you will incur a decompression obligation. It is displayed in minutes, and rounded down
to the nearest minute. You should NEVER exceed this time, unless you have specific training in
decompression diving.
•
TTS – Time To Surface is total time it should take you to get to the surface, if you were to
precisely follow your KAON’s ascent schedule, including all the stops and recommended gas
switches. It is printed in minutes, and rounded up to the nearest minute.
•
STOP/FOR (Standard display) – Shown together, this pair describes the deepest decompression
stop on your KAON’s ascent schedule. Below “STOP” there is depth of this stop (in meters or
feet, depending on your
settings). Below “FOR” there is the stop’s duration, in minutes,
rounded up to the nearest minute. If you are shallower than this stop, the depth below “STOP”,
will blink to remind you to go deeper.
In Graphical Display mode, STOP/FOR is shown like this:
. The hand means “Stop” and the
stop depth is shown beside it. The clock means “For” and the stop duration is shown beside it.
•
STOP (Standard display) – Shown as a standalone value, “STOP” shows the length of the
current decompression stop on your KAON’s ascent schedule when you are currently at this
stop (that is, within 0.5m / 1.6ft from it). It is displayed in minutes and seconds, rounded up to
10 seconds.
In Graphical Display mode, STOP is shown like this:
. The hand means “Stop” and the stop
depth is shown beside it.
Deco Info Zone
