Liquivision kaon, User Manual

Page: 54 / 107

Dive Computer
User Manual
Liquivision Products, Inc -
54
- Revision 1.9 Software 1.17
It will stop once you surface, and it will reset once you have been on the surface for more than the
Minimum Surface Interval .
Diving within NDL Limit STANDARD – in DECO GRAPHIC – in DECO
The minutes of your dive can be displayed as follows (refer to the “
Show Hours ” section for details):
•
minutes:seconds, e.g. 135:00
•
hours:minutes:seconds, e.g. 2:15:00
The seconds of your dive can be displayed as follows (refer to the “
Analog Clock ” section for details):
•
as a number, e.g. 135:00
•
a graphical indication of the seconds elapsed: a bar display filling up to a full minute
The green number in the lower-right-hand corner of the display (here, circled in red) is your Current
Depth. If you chose metric units, you will see the depth in meters, with one decimal place in smaller
font. If you chose imperial units, you will see the depth in feet, with no decimal places. Please refer to
the “
Depth
Units ” section of the manual for details on choosing units.
Diving within NDL Limit STANDARD – in DECO GRAPHIC – in DECO
The horizontal section in the middle of the screen is reserved for your No Decompression Limit or
decompression information. Each number in this section has either a name or a graphical indicator.
Here is a list of available data:
Decompression Information Zone