Instructions
Saddle-mount unit GSG-S-VM
50 - 72
010710-03-EN BA GSG-S-VM / 13.07.2020
22. Emptying the GSG-AN-VM2 after use
Plant protection agents are only allowed to be used on agricultural /
forested / horticultural surfaces.
This applies also to the remaining agent, which remains for technical
reasons in the tank and for the liquid, which cumulates during inner and
outer cleaning of the machine after use.
Plant protection agents should never remain in the
GSG-S-VM
for an
extended period; therefore, the precise amount of spraying liquid
needed should be calculated before spraying.
Remaining spraying liquid must be disposed according the regula-
tions of JKI Braunschweig.
When diluting with fresh water it is a good idea to add the water via
the tank cleaning nozzle. This allows the tank to be cleaned while di-
luting the agent.
It is advisable to switch off the mixing unit for the last 50 l, in order to
empty the tank as far as possible.
23. Residual volume
For technical reasons, a certain volume of liquid will always remain
in the tank
after the emptying
.
The below indicated remaining volume applies up to an inclination of
8%, higher inclination will create higher residual volume.
Remaining residual volume up to 8% inclination:
GSG-S-VM
16 l.
It is not possible to discharge this volume completely via nozzles and
pump.
Avoid entering of this residual volume into drains or surface water.
Dilute the remaining volume up to 10% with water out of freshwater
tank and s
pray this diluted volume on an untreated area of the field
(approx. 1000m²)
Summary of Contents for GSG-S-VM
Page 2: ...Instructions Saddle mount unit GSG S VM 2 72 010710 03 EN BA GSG S VM 13 07 2020...
Page 30: ...Instructions Saddle mount unit GSG S VM 30 72 010710 03 EN BA GSG S VM 13 07 2020...
Page 70: ...Instructions Saddle mount unit GSG S VM 70 72 010710 03 EN BA GSG S VM 13 07 2020 34 Notices...
Page 72: ...72 72 Design mail bauer ib com...
