![background image](http://html1.mh-extra.com/html/lipco/gsg-s-vm/gsg-s-vm_translation-of-the-original-instructions_1926987016.webp)
Instructions
Saddle-mount unit GSG-S-VM
16 - 72
010710-03-EN BA GSG-S-VM / 13.07.2020
13. Components of GSG-S-VM
13.1. Filters
Suction filter 50 mesh = 0,297 mm:
•
Suction filter on top of spray
liquid tank.
The filter insert should be
checked several times daily for
dirt and cleaned, if necessary
Fig. 1
Pressure filter 50 mesh = 0,297 mm:
•
The pressure filter is located
between the shutoff motors.
•
The quick cleaning unit in lower
end of the pressure filter is
connected to hydro injector in
tank and permanently pressur-
ized.
Drain valve must be perma-
nently open.
Fig. 2
•
This circuit guarantees an extended cleaning cycle.
•
More pressure filters are integrated in the spaying nozzles.
•
These nozzles filters should be checked by the end of the spay-
ing procedure and cleaned if necessary.
Summary of Contents for GSG-S-VM
Page 2: ...Instructions Saddle mount unit GSG S VM 2 72 010710 03 EN BA GSG S VM 13 07 2020...
Page 30: ...Instructions Saddle mount unit GSG S VM 30 72 010710 03 EN BA GSG S VM 13 07 2020...
Page 70: ...Instructions Saddle mount unit GSG S VM 70 72 010710 03 EN BA GSG S VM 13 07 2020 34 Notices...
Page 72: ...72 72 Design mail bauer ib com...