Lipco GSG-S-VM, Translation Of The Original Instructions, Page: 24 / 72

Instructions Saddle-mount unit GSG-S-VM
24 - 72 010710-03-EN BA GSG-S-VM / 13.07.2020
15. Mounting GSG-S-VM on harvester
•
Do not walk within the operating area of the harvester!
•
The support feet, supplied with the GSG-S-VM , are used to at-
tach the GSG-S-VM on the harvester.
Fixing points / support feet (4x):
•
Fig. 13
•
Drive harvester carefully under the GSG-S-VM until both mount-
ing bushes on the rear of the harvester and the mounting pins on
the
GSG-S-VM are properly aligned!
•
Lift the chassis of the harvester hydraulically until the 4 supports
of the
GSG-S-VM are clear from ground. Then remove them.
•
Secure both locating pins!
Fixing points:
•
GSG-S-VM chassis fixing
points, here for example har-
vesting machine BRAUD.
(Fig. 14)
Fig. 14